If the main sewer is accessible but at a higher level to (or some distance from) the domestic foul drain, then a domestic sewage pump set may be used to pump unsettled sewage directly to the main.
Whilst single pump units are acceptable for individual houses, it is recommended that twin pumping systems be used for multiple dwellings.
A septic tank or treatment system pump set can be used to disperse settled effluent when a site has a high water table or adverse invert levels. Installed after the septic tank or treatment system and pumping settled effluent up to an inspection chamber, flow to the drainage system then takes place by gravity in the normal way.
Surface Water Pump sets
Due to the amount of rainwater that can fall in a short time period, Surface water run-off is often the most demanding of all applications, whether hard-standing or roof areas.
We offer a comprehensive range of packaged pump systems in both standard form or manufactured to bespoke specifications. Careful calculation of the run-off areas is essential when sizing these pump systems.
Key Points
Firstly, don’t worry too much on sizing your pump station, all we need from you is information on key factors such as:
- Application: e.g., domestic residential /commercial
- Sewage, effluent or surface water?
- Inlet depth (below ground level)
- Pumping distance and lift
- Electrical supply
At Septic Tank Supplies we offer a range of Sewage and surface water pump stations to suit all applications from small domestic or out buildings to large commercial sites.
We supply pumping stations from the of the UK's biggest manufactures;
Simply give us a call on 01923 261660 or send us an email - sales@septictank-supplies.co.uk with your enquiry and site information and we will be able to size the correct pump station for your application.
No comments:
Post a Comment